Twin Series according to DIN 3015, Part 3

Modular system with original STAUFF block-style fixing clamps according to DIN 3015 (Part 3: Twin Series) for the fast, simple and simultaneously secure fastening of pipes, tubes, hoses, cables and other components with outer diameters of up to 42 millimeters (1 1/2") – and not just in hydraulics. Full product range. Individual components and clamp sets. Tried and tested over decades. Tested and approved by many international certification bodies.

Categories

11 Categories
Channel Rail Adaptors (Twin Series)
Channel Rail Adaptors (Twin Series)
Channel Rail Adaptors (Twin Series)
According to DIN 3015, Part 3
Hexagon Rail Nuts (Twin Series)
Hexagon Rail Nuts (Twin Series)
Hexagon Rail Nuts (Twin Series)
According to DIN 3015, Part 3
Mounting Rails (Twin Series)
Mounting Rails (Twin Series)
Mounting Rails (Twin Series)
According to DIN 3015, Part 3
Safety Locking Plates (Twin Series)
Safety Locking Plates (Twin Series)
Safety Locking Plates (Twin Series)
According to DIN 3015, Part 3
Stacking Bolts (Twin Series)
Stacking Bolts (Twin Series)
Stacking Bolts (Twin Series)
According to DIN 3015, Part 3
Socket Head Cap Screws (Twin Series)
Socket Head Cap Screws (Twin Series)
Socket Head Cap Screws (Twin Series)
According to DIN 3015, Part 3
Hexagon Head Bolts (Twin Series)
Hexagon Head Bolts (Twin Series)
Hexagon Head Bolts (Twin Series)
According to DIN 3015, Part 3
Cover Plates (Twin Series)
Cover Plates (Twin Series)
Cover Plates (Twin Series)
According to DIN 3015, Part 3
Weld Plates (Twin Series)
Weld Plates (Twin Series)
Weld Plates (Twin Series)
According to DIN 3015, Part 3
Clamp Kits (Twin Series)
Clamp Kits (Twin Series)
Clamp Kits (Twin Series)
According to DIN 3015, Part 3
Clamp Bodies (Twin Series)
Clamp Bodies (Twin Series)
Clamp Bodies (Twin Series)
According to DIN 3015, Part 3

STAUFF Online Page-Flip Catalog

Navigate and search content, forward via email, print and download in PDF format

STAUFF Online Page-Flip Catalog
Navigate and search content, forward via email, print, and download in PDF format

STAUFF Product Catalog

Download entire STAUFF product catalog in PDF format!

Original STAUFF Clamps According to DIN 3015, Part 3

Twin Series: Fastening two lines with one clamp

The core of the Twin Series is formed by the clamp bodies, which consist of two mirrored, i.e. identical, clamp halves. These clamp bodies achieve highly effective vibration damping and noise reduction. This allows STAUFF clamps from this series to make a substantial contribution to preventive health and safety and environmental protection. With the Twin Series according to DIN 3015-3 (Fastening clamps - Block clamps - Part 3: Double clamps [Z]), STAUFF offers a modular system for easy and reliable attaching of multiple tubes, hoses, electric cables, rigid and flexible lines, and other components. The special feature: Two lines with the same or different diameters can be attached with a single clamp, directly adjacent. As a standard, the series covers all common metric and imperial diameters between 6 and 42 mm. This means that the component from the Twin Series are suitable for applications with light to medium loads on the lines. 

Materials and Resistances

The clamp bodies are manufactured from high-quality plastic as a standard and are therefore resistant to UV radiation, weather and chemicals: The typically used materials are polypropylene (PP), polyamide (PA) and thermoplastic elastomer or full rubber (SA). Flame-retardant materials are also available to meet individual fire protection requirements.  

STAUFF polypropylene clamp bodies are usually green. Black polypropylene clamps are optionally available. PA clamps and full-rubber clamp bodies are also black as a standard.

Smooth and Ribbed Versions

The STAUFF range of standard clamp bodies includes smooth and ribbed versions: 

Clamp bodies with a ribbed inner surface and pre-tensioning are recommended for reliable attaching of tubes. They should preferably be used as a fixed-point clamp, where the tube is clamped between the two halves of the clamp. The outer diameter of the line to be attached corresponds to the inner diameter of the clamp body as shown in the catalogue and on the product itself. The gap between the two clamp halves ensures the appropriate pre-tensioning during attaching. The recommended screw tightening torques and maximum tube retention forces defined in the product catalogue must be observed. 

Clamp bodies with a smooth inner surface and without pre-tensioning (type H) are recommended for reliable attaching of hoses and cables. Smooth inner surfaces and chamfered edges prevent damage to hoses and cables. The outer diameter of the line to be attached corresponds to the inner diameter of the clamp body as shown in the catalogue and on the product itself. The following applies for use as a floating bearing: The inner diameter of the clamp body stated in the catalogue and on the product itself is selected to be marginally larger than the outer diameter of the line to be attached (in accordance with the specific requirements), so that the line is only guided by the clamp body rather than clamped.

Weld Plates, Rail Nuts, Cover Plates and Other Accessories

STAUFF offers a range of accessories for clamps in the Twin Series that is unrivalled in its scope, quality and availability.  

This includes weld plates in all available versions, which are used as base plates or ground plates. In addition to simple weld plates, this also includes double and multi weld plates. 

Rail nuts from STAUFF allow the installation of tube clamps, hose clamps and cable clamps on mounting rails and C-rails, which are available in different heights. In contrast to the usual variants using welding or screws, the position of the clamps can easily be adjusted along the mounting rail before final tightening. Clamps can also easily be added or removed later on through the openings in the side of the mounting rail.  

STAUFF CRA channel rail adaptors allow Twin Series STAUFF clamps in block form to be easily and safely adapted to different profile rails from a number of renowned manufacturers. This allows tubes and hoses as well as cables and other components to be easily installed and then adjusted at any time later on. 

Also included in the accessories range: Cover plates, safety locking plates, locking washers and safety washers.

As a standard, STAUFF supplies hexagon head screws, i.e. screws with a hexagon head type AS according to DIN 931 (with shaft) or DIN 933 (thread up to the head) or ANSI/ASME B18.2.1., hexagon socket screws, i.e. cheese-head screws with a hexagon socket type IS according to ISO 4762 (previously DIN 912) or ANSI/ASME B18.3. as well as stacking screws according to the STAUFF factory standard. 

In terms of materials, the entire accessories range is available in steel or stainless steel in the qualities V2A 1.4301/1.4305 (AISI 304/303) and V4A 1.4401/1.4571 (AISI 316/316 Ti). The steel variants are supplied with different coatings from the factory (phosphated, plain/uncoated, zinc-nickel coating). The special STAUFF zinc/nickel coating offers reliable corrosion protection that goes far beyond previous market standards – even after transport, processing and assembly of the components. This was confirmed by tests in a salt spray chamber in line with EN ISO 9227.

Independent Certificates, Approvals and Registrations

Independent Certifications, Approvals and Registrations are Available for the STAUFF Twin Series:

  • American Bureau of Shipping (ABS)   

  • Bureau Veritas (BV)   

  • Det Norske Veritas/Germanischer Lloyd (DNV-GL)  

  • Lloyd's Register (LR)   

  • Department of the Navy   

  • Registro Italiano Navale (RINA)

  • Technischer Ãœberwachungsverein (TÃœV – German Technical Inspection Association) for the Twin Series   

  • United States Coast Guard(USCG)   

STAUFF Products for Sale Online

Via the STAUFF online shop, commercial customers and users can purchase and order the products listed in this category online – quickly, easily, safely, and with fair pricing conditions.

The complete range of products for mechanical and plant engineering and for industrial service and maintenance available from STAUFF includes more than 50,000 individual standard hydraulic components in 10 product groups. STAUFF also guarantees prompt service for custom-designed system and special solutions according to customer's requirements. 

Original STAUFF products are available from stock directly from the manufacturer. 

EditMenuCloseResetCheckSpinnerFiltersCart